spare part, trussrod adjustment key
spare part, trussrod adjustment key
string winder with dual string clipper, bridge pin remover, 10mm spanner and flat-blade screw drive
"Punch-a-Pick" pick cutter, max thickness 2mm
cleaner spray KONTAKT 60, 100ml spray can
cleaner spray KONTAKT 60, 200ml spray can
rubber edged grain filler applicator - 150mm width
allen wrench, 1.5mm
allen wrench, 3.0mm
allen wrench, 4.0mm, 30.0mm long
truss rod wrench, for 9/32" nut
truss rod wrench, for 5/16" Gibson nut
phillips head truss rod wrench, adjustment without taking off the neck
allen wrench set with holder and screws, 4 sizes, 1.5/2.0/2.5/3.0mm
allen wrench, 1.27mm, .050"
allen wrench, 5.0mm, 30.0mm long
guitar neck support, wood, short model
compact fret crown file, small (R:1mm) coarse cut and fine cut sides, blue
compact fret crown file, medium (R:2mm) coarse cut and fine cut sides, yellow
compact fret crown file, jumbo (R:3mm) coarse cut and fine cut, red
fret crowning file, for narrow frets, ukulele and mandolin
fret crowning file, for standard frets
fret crowning file, for jumbo frets
3 in 1 diamond fret crown file three width sizes
fret end file (pencil like shape) for precise filing, for small frets (R=1mm)
fret end file (pencil like shape) for precise filing, for medium frets (R=2mm)
fret end file (pencil like shape) for precise filing, for wide frets (R=3mm)
fret levelling file, 160 mm (L) x 28mm (W) x 5 mm (D), single cut teeth per inch: 20 cut
fret end file, extra fine (15cm length, 3mm width, 2mm thickness)
dual grit mini diamond plates, for honing sharp fret ends and sharpening knives, 150/600 grit
